The HMA dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions:
Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air..
Avaliable in pre-cooled and after-cooled versions for warm climates.
Robust design with steelframe, eyebolts etc..
Vital parts can easily be maintained and exchanged.
Large air inlet grills and filters.
Can be built into containers for protection.
Adjustable dehumidifying capacity and outlet air temperature
Dry air pressure up to 1200 Pa
HMA Series | DH 3000 | DH 5000 | DH 8000 | DH 10000 |
Dehumidification Capacity | 14.4 kg/h | 32.0 kg/h | 52.4 kg/h | 62.0 kg/h |
Proses Air Flow | 3,000 m3/h | 5,000 m3/h | 8,000 m3/h | 10,000 m3/h |
Heating Group | 20 kW | 30 kW | 40 kW | 50 kW |
Reg. Fan Motor | 2.2 kW | 3.0 kW | 4.0 kW | 5.0 kW |
Proses Fan Motor | 3.0 kW | 4.0 kW | 5.5 kW | 8.0 kW |
Engine rotor | 0.09 kW | 0.09 kW | 0.09 kW | 0.09 kW |
Max. Power Consumption | 26 kW | 38 kW | 50 kW | 64 kW |
Height | 1,100 mm | 1,200 mm | 1,270 mm | 1,450 mm |
Width | 900 mm | 1,100 mm | 1,180 mm | 1,300 mm |
Size | 1,800 mm | 2,300 mm | 2,780 mm | 2,950 mm |
Weight | 580 kg | 850 kg | 980 kg | 1,150 kg |
Electric | 380V 60Hz --- 230 / 380 V - 50Hz (for the vessels) | |||
Air Inlet | 150 mm | 200 mm | 265 mm | 300 mm |
Dry Air Outlet | 165 mm | 217 mm | 275 mm | 310 mm |
Air Flow (max.) | 1100 Pa |